No Hot Water? Common Causes & Tips to Deal with Yourself

Set An Appointment

We've stumbled upon this post on No Hot Water — Water Heater Repair listed below on the web and concluded it made perfect sense to talk about it with you on this page.


Hot Water Heater Repair
Numerous modern houses use an electrical hot water heater for their furnace, as a result of its ease and also convenience of use. Nonetheless, similar to any other electric devices, problems might emerge with its use, unexpectedly. It can be actually irritating to wake up to a cold shower instead of a hot one or having your bathroom with water that isn't warm adequate or perhaps also warm. Whatever the instance might be, hot water heater troubles can be rather aggravating. Luckily, we have actually made a checklist of possible remedies to your hot water heater concerns. There are a number of factors that can cause many of these problems, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you shut off the primary power supply for security. Whatever the problem is, getting it fixed should not position excessive of a problem if you adhere to these actions:

Examine Your Power Supply:


As basic as this may seem, it is extremely required. Without appropriate power, your water heater will not work. So the first thing to do when your water instantly retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the breaker stumbled. If the breaker is the issue, simply turn it off and on again. Replace any broken or worn-out fuse. Evaluate the appliance with power after these changes to see if it's now working.

Check the Burner in the Hot Water Heater:


If it's not a power issue, then try having a look at your heating element if it is still working. Test each of your heating elements to be sure the trouble isn't with any one of them. If any one of them is damaged, change that component and afterwards inspect whether the warm water is back on.

Inspect Your Thermostat:


If your water heater still isn't working or the water appearing isn't warm enough, you may need to check the temperature level setups on your top thermostat. Guarantee the breaker is turned off prior to doing anything. Open the access panel and press the red switch for temperature level reset over the thermostat. This ought to help warm the water. Transform the breaker back on and examine if the issue has been resolved.

Call A Specialist:


If after replacing all faulty components as well as resetting your temperature, the water heater still isn't functioning, you may need to speak to an expert plumber for a professional viewpoint. The problem with your heater could be that the cold and hot taps have been changed or it may be undersized for the quantity of warm water needed in your house. Whatever the case might be, an expert plumber would aid fix the problem.

Verdict


Hot water heater problems are not constantly major. Many of them result from minor concerns like a blown fuse or damaged heating element. Changing the defective components must do the trick. Nonetheless, if you are still unable to address the issue, give a call to your nearest plumber to find to get it fixed.

Common Reasons Why Your Hot Water Heater Isn’t Working


Water Gets Too Hot


Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.



FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.


Water Doesn’t Get Hot


This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).



FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.


Leaking Water Heater


A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.



FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.


Noisy Water Heater


Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.



FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.


Pilot Light Keeps Going Out


Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.



FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.


Water Smells Bad


The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.



FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.


Water Looks Brown Or Rusted


The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)



FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/



I ran across that blog posting on How to Troubleshoot and Repair an Electric Water Heater when doing a search on the search engines. For those who appreciated our page plz don't forget to pass it around. We love reading our article about Hot Water Heater Repair.




Schedule An Appointment

Leave a Reply

Your email address will not be published. Required fields are marked *